| |
| |
| |
连接外部信号线 | |
8CH | Air Flow Meter Test |
Auto Calibration | Automotive Test1 |
Cam Shaft Test | Can Bus Test |
Craking Exhaust diagnosis | Crank Shaft Test |
Curser1 | Curser2 |
Distributor Test | Lambda Test |
Lin Bus Test | Math |
Measure | Ref |
Set WaveForm Parameter | Set WaveForm Mana l2 |
Secondary Ignition Te | FFT |
规格 | Hantek1008A | ||
采集卡模式 | |||
垂直 | 模拟通道 | 8 | |
输入阻抗 | 电阻: 1MΩ | ||
输入灵敏度 | 10mV/div to 5V/div | ||
输入耦合 | DC | ||
分辨率 | 12 bits | ||
水平 | 记忆深度 | 4K | |
最大输入 | 400V (DC+AC Peak) | ||
实时采样率 | 2.4MS/s | ||
基准范围 | 1ns/div to 20000s/div(1-2-5 sequences) | ||
基准精度 | ±50ppm | ||
触发 | 触发源 | CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8 | |
触发模式 | Edge | ||
X-Y 模式 | X-Axis输入 | CH1 | |
Y-Axis输入 | CH2 | ||
自动测量 | 电压测量 | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot | |
时间测量 | Frequency,Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle | ||
光标测量 | 水平、垂直追踪、自动测量模式 | ||
波形信号处理 | | +,- , x,÷, FFT, Invert | |
电压范围 | | 10mV to 5V/div @ x 1 probe | |
100mV to 50V/div @ x 10 probe | |||
10V to 5000V/div @ x 1000 probe | |||
100V to 50000V/div @ x 10000 probe | |||
200mV to 100V/div @ 20:1 | |||
电流范围 | | 100mA to 50.0A/div @ CC65(20A) | |
1000mA to 500.0A/div @ CC65(65A) | |||
1A to 100.0A/div @ CC650(60A) | |||
10A to 1000.0A/div @ CC650(650A) | |||
1A to 200.0A/div @CC1100(100A) | |||
10A to 2000.0A/div @CC1100(1100A) | |||
光标测量 | | Time/frequency difference, voltage difference | |
FFT | | Rectangular,Hanning,Hamming,Blackman Window | |
数学 | | 加、减、乘、除 | |
可编程信号输出模式 | |||
通道数 | | 8 | |
输出电平 | | LVTTL | |
频率范围 | | 0-250kHz | |
通信接口 | | USB 2.0 | |
电源 | | 无需外接电源 | |
机器规格 | 体积 | 185 x 150 x 27 (mm) | |
重量 | 0.35Kg |